3kV Medium Voltage Motor Drives And Controls
|Payment Type:||L/C,T/T,D/P,Paypal,Money Gram,Western Union|
|Terms of Trade:||FOB,CFR,CIF,EXW|
|Min. Order:||1 Set/Sets|
|Delivery Time:||30 Days|
|Productivity:||1500 SETS/ YEAR|
|Place of Origin:||China|
|Supply Ability:||2000 SETS/ YEAR|
|Certificate:||CE,ISO 9001, ISO 14001, OHSAS 18001|
Model No.: JD-BP36-XXXXF
The power unit automatic bypass circuit can realize the function of non-stop failure. The FGI-Tech's 3kV motor speed drives, feature a unique technology that allows FGI to offer a simple, flexible and reliable drive solution. Building on many years of experience, FGI has demonstrated capability as innovator with an imaginative approach to the design and development of high performance electric power systems, enabling greater affordability, efficiency and reliability. The MV motor drives and controls are widely used in fans, compressors, pumps and so on. FGI develops the high quality medium voltage motor drives international.
HMI: Provide users with friendly all-round document operation interface, responsible for dealing with information.
Each phase is connected in series by a multi-level unit;
Unit standardized structure, 3kV/6kV/10kV unit junction is the same;
The unit communicates with the control cabinet through the optical fiber to control good performance.
The control core is based on DSP+FPGA, the system is powerful and can meet the customer's needs to the greatest extent;
Independent main control box, plug-in control board, easy to install and maintain;
Rich interface with multiple choices.
The medium voltage drive is composed of switch cabinet, phase shift transformer cabinet, power unit cabinet control cabinet. Among them, the switch cabinet is different according to different sites.The equipment adopts the high-high voltage source type inverter circuit structure, the power units are connected in series, the output is superimposed into high voltage, and directly output to the high voltage motor.
3kV series MV Drives with 3 units per phase / 6kV series MV Drives with 5 units per phase / 10kV series MV Drives with 8 units per phase
The power unit of the two-quad high voltage drive is mainly composed of rectifier diode, filter capacitor and IGBT. Each power unit is an H-bridge structure that outputs a set of SPWM waves.
The whole machine has several units per phase. Through the carrier phase shifting technology, the output voltages of each unit are superimposed to form a multi-level high voltage output. There is no need to output the filtering device, the current harmonics are small, and there is no damage to the cable and motor insulation. The figure shows output voltage waveform of each of the five units and the superposed voltage waveform.
When the motor is in the drag state, the energy flows from the rid through the rectification loop and the inverter loop to the motor, and the VFD works in the first and third quadrants. The input voltage and current waveforms are as shown.
The four-quad high voltage drive can perform energy feedback, and the power unit replaces the input rectifier diode with the IGBT with respect to the two-quad high voltage drives, realizing the energy bidirectional flow.
When the motor is in the power generation state, the DC bus voltage is greater than the input voltage, and the feedback control part inverts the DC voltage into an AC voltage, and the energy is fed back to the grid by controlling the voltage phase and amplitude. At this time, the energy flows from the motor to the grid through the inverter side and the feedback side. The inverter works in the second and fourth quadrants, and the feedback current and grid voltage waveform are as shown.
Vector control technology
Multi master-slave control technology
Star drift technology
Output voltage automatic voltage regulation technology
Hot reset function
Frequency conversion without disturbance switching technology
Other Performance Characteristics
Flying start technology
Instantaneous power outage, drop without stopping (low voltage ride through)
Color full Chinese human machine interface
Dual loop control power supply
Multiple control methods
High power density ahead of the industry
Perfect protection mechanism
DC braking technology
Current limiting technology
Temperature pre-alarm technology
Overvoltage stall technology
High and low voltage ride through technology
Product Model Description and Dimensions
Product Model: JD-BP36-XXXXF / JD-BP36S-XXXXF / JD-BP37-XXXXF / JD-BP37S-XXXXF / JD-BP38-XXXXF / JD-BP38S-XXXXF
Power Level(kW): 200~20000kW (take 4-pole motor as standard, 6 to 12 pole motors are selected by current)
Output Voltage(kV): Three phase 0 ~ 3kV / Three phase 0 ~ 3.3kV / Three phase 0 ~ 6kV / Three phase 0 ~ 6.6kV / Three phase 0 ~ 10kV / Three phase 0 ~ 11kV
Rated Power(kW): Rated power of rated motor voltage: 200 ~ 20000kW
Rated Current(A): Rated current of rated motor voltage
Overload Capability: 105% continuous, 130% allowed 1min, 150% allowed 3s, 180% immediate protection
Waveform: Multiplexed SPWM sine wave
Input Voltage: 3kV / 3.3kV / 6kV / 6.6kV / 10kV / 11kV
Allowable Range of Fluctuation: Voltage: -10%~+10%, -10%~-35% Derating continuous operation: frequency ±5%
Control Power Input: AC 220V 2kVA
Precision: Analog setting: 0.3% (25 ± 10 °C) below the maximum frequency setting. Digital setting: 0.02% (-10 ~ +50 °C) below the maximum frequency setting
Resolution: Analog setting: one thousandth of the highest frequency setting. Digital setting: 0.01Hz
Efficiency: >97%,when rated output
Power Factor: >0.95
High Voltage Isolation: Electromagnetic coupling, multi-channel fiber transmission
Acceleration, Deceleration Time: 0.1 to 6000.0s, for acceleration, deceleration time can be set separately
Voltage/Frequency Characteristics: 0: normal, 1: square curve, 2: multi-section V/F curve
Built-in PID: Easy to implement process closed-loop control
Operation Guide: The control (touch screen) operation, remote external control operation, upper computer operation (optional)
Frequency Given: Touch screen digital reference, multi-speed speed reference, external control analog signal (DC 4 ~ 20mA) given
Operating Status Output: Relay status output, inverter fault, alarm, run/stop status indication
Touch Screen Display: Input/output voltage, input/output current, set frequency, fault status of each unit, operating status, transformer status, bus voltage of each unit, etc.
Protective function: Motor over current, whole machine over voltage, whole machine under voltage, unit over current, unit over voltage, unit overheat, unit input phase loss, fiber communication failure, etc.
Digital Input: Total 15 channels
Digital Output: Total 15 channels
Analog Input: Three channels 4 ~ 20mA (channel can be set): frequency given, pressure feedback, motor temperature, etc.
Analog Output: Four channels 4 ~ 20mA (channel can be set): output frequency, output current, output voltage, excitation control (for synchronous motor control)
Communication Interface: One RS485 interface, support MODBUS and PROFIBUS protocol; one channel CAN interface
Place of Use: Indoor, no corrosive or conductive gas, dust, direct sunlight, altitude below 1000m (high altitude area can be customized)
Ambient Temperature / Humidity: -10°C~ +40°C /20% ~ 90%RH No condensation
Place of Use: 5.9m/ s2 (below 0.6g)
Storage Temperature: -20°C~ +65°C (for short-term storage such as transportation)
Cooling Method and Enclosure Protection Level: Forced air cooling / IP31
Type of Inverter Power Level Size and Weight
(W) width(mm) (D)depth(mm) (H) height(mm) weight(kg)
JD-BP36-250F 250kW/6kW 2300 1500 1900 1320
JD-BP36-250F 280kW/6kW 2300 1500 1900 1380
For more information, please see the following picture.
Boiler feed water pump, blower, induced draft fan, condensate pump, circulating water pump, mortar pump, compressor, vacuum fan, booster fan
Petroleum, petrochemical, natural gas fields
Air compressor, induced draft fan, pipeline pump injection pump, oil pump feed pump, submersible pump, circulating water pump, brine pump
Coal, mining field
Hoist, counter-rotating fan, axial fan, descaling pump, agitating pump, dust removing fan, mud pump, slurry pump, clean water pump, feed pump, drain pump, medium pump
Dust removal fan, blast furnace blower, induced draft fan, compression fan, oxygen compressor, blower, feed pump, water pump, descaling pump, SO2 fan, slag machine converter, electric furnace, blast furnace, descaling pump, gas compressor
Cement and building materials
Raw material grinding induced draft fan, cement grinding fan, sorter fan kiln induced draft fan, kiln supply fan, tail exhaust fan, high temperature fan coal mill, dust removal fan, circulation fan, pressure blower
Light industry, chemical industry
Pressurized pump, compressor, axial pump, soft water pump, blower, induced draft fan
OEM Service is available
After-sales responding within 24 hours
One to one pre-sales consulting services
We are factory with high-tech professional engineer teams
Technician could be assigned to go abroad to carry out site commissioning and technical training
FGI-Tech, a diversified electrical supplier and manufacturer, provides world class AC motor products - medium voltage drives and explosion-proof AC inverter, advanced power distribution systems and power quality solutions. FGI-Tech is committed to innovating energy technology to make broad contributions to the world in the fields of industry automation and energy power".
The FGI-Tech's medium voltage variable frequency drives, feature a unique technology that allows FGI-Tech to offer a simple, flexible and reliable drive solution. Building on many years of experience, FGI-Tech has demonstrated capability as innovator with an imaginative approach to the design and development of high performance electric power systems, enabling greater affordability, efficiency and reliability.
FGI-Tech's BPJV series mining explosion-proof and intrinsically safe AC inverter as one of the high-tech products which combine digital frequency speed regulation technology and related cooling technology. It is widely used in coal mine with coal dust, gas and other explosive dangerous environment, dragging speed governing operation of motor to achieve soft start and soft stop, stepless speed regulation and other functions when the motor is overloaded.
FGI-Tech's distribution transformers are manufactured using the highest quality materials, employing the most modern and reliable manufacturing practices. These Transformers are used for indoor or outdoor applications and can be provided with off-load and on-load tap changers.
FGI-Tech's power quality products consist of static var generators (STATCOM). SVG is the best solution in the reactive power control field at present and has unparalleled advantages. It makes energy more efficient by stepless power factor correction. It is widely used in the application of Renewable power generation, Electrical welding systems, Industrial production machines and so on.
At FGI-Tech we believe in building strong relationships, helping our customers through the complete product life cycle, from selection and electrical system design through to commissioning assistance and after sales service and support. FGI-Tech supports electricity infrastructure with proven technologies to ensure that energy can be supplied in a stable, reliable, and optimal manner.
With standard controls, critical parts, packaged assemblies, and electrical/electronic components are stocked and ready to ship from FGI-Tech.
FGI-Tech aims to pursue innovation in energy and environment technology and to continue creating high-value-added, environmentally friendly products and systems that allow energy to be used stably and with maximum efficiency.
We hope that you are always holding FGI-Tech to high standards.
- Company Name: FGI SCIENCE AND TECHNOLOGY CO., LTD
- Representative: Mikhail Feng
- Product/Service: Medium Voltage Drives , Low Voltage Drives , Distribution Transformers , Dry Type Transformers , Static Var Generator , Static Synchronous Compensator
- Capital (Million US $): 500,000RMB
- Year Established: 2015
- Total Annual Sales Volume (Million US $): US$1 Million - US$2.5 Million
- Export Percentage: 91% - 100%
- Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
- No. of Production Lines: 10
- No. of R&D Staff: 21 -30 People
- No. of QC Staff: 11 -20 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 5,000-10,000 square meters
- Factory Location: Middle section of jincheng road, economic development zone, wenshang county, shandong province
- Contact Person: Ms. Miranda Mu
- Tel: 86-86--13723461681
Premium Related Products